A typical pool inspection usually last about 60 to 90 minutes
When the inspector arrives at the property, they’ll take notes on the basics of the pool, such as the age, size, and type of material.
The inspector will also calculate its water capacity. The inspector will also perform the pool water test to establish whether the balance levels fall within the acceptable range.
For instance, imbalanced water chemistry often leads to staining or worse, calcium build-up.
The inspector will keep a close eye on stains on the surface of the pool finish or pool liner and any cracks in the cement, grout, and tiles.
The inspector will check the deck for cracks because of settling .
The inspector will check and note the condition of all the pool equipment and filtration system.
In cases where the equipment is off, the inspector may power it on to make sure it’s working properly.
In the case of a pool heater, the exsisting homeowner shall make sure it can be turned on and operational.
Does a pool inspection determine if the pool is up to code?
Absolutely. Safety is one of the main considerations when purchasing a home with a pool.
Inspectors are familiar with all the local regulations necessary for a pool to be up to code. For example, some counties require it to have a fence, together with varying specifications for the size and type of the fence.
This is an important consideration for many buyers. Pool fences aren’t cheap.
After your pool inspection a detailed report will be sent to the seller or buyer and realtor. Usually within 2 to 3 days.
